HT GOLD
Our Finest Brushed Aluminum LCRHidden In-Wall Home Theater Speaker
GTL Sound Labs HT Gold in-wall speaker is a powerful combination of high performance and craftsmanship, while maintaining a similar performance to high-end floor models, by using GTL’s patented “Resounding Chamber Technology” which delivers 96% sound out of the front of the speaker and sends 4% to loss. The precision CNC-cut 1/4″ thick black brushed aluminum faced unit is attached to a full-enclosed MDF deep backbox. The unit is 48″ tall by 19″ wide and weighs 74 pounds with full rubber gasket for mounting with 12 screws.
- The HT Gold, like all GTL Sound Labs loudspeakers produced over the last 15-years, utilize very large sized driver magnets made with Y35 Strontium Barium high-strength material and signature woven carbon fiber cones, which produces exceptional dynamic range, truly accurate detail, and rich smooth deep-reaching bass with truly superb roll-off. This magnet structure provides the least magnetic field distortion. To complete the sound field, we use a pair of GTL proprietary silk-dome tweeters that reproduce unsurpassed high frequency detail without the sharpness commonly associated with beryllium tweeters.
- What sets GTL apart is their engineering and design of their crossover using only the finest components, nominally only found in units 4-times their cost. The highest quality crossover is the heart of all high end speaker and without it sound falls short even if better drivers are used.
- Incorporating all of these features makes for the finest dress out home theater speakers available for installation behind micro-bead screens.. For 40-plus years GTL has earned the reputation as “The Gold Standard of Fine Audio”
HT GOLD | Technical Specifications
- Recommended Power: 50 to 300 watts
- Normal Impedance: 8 Ohms, Sensitivity: 92dB (2.83V at 1 meter)
- Frequency Response: 30Hz – 20kHz (+/- 3dB),
- Crossover: 600Hz, 3kHz; 12 dB/Octave
- Low Frequency Transducer: 9″ Woven Carbon Fiber Woofer with Butyl with rubber surrounds 2″ VC and 40oz vented magnet
- Mid Frequency Transducer: 2 – 6.5″ Woven Carbon Fiber Woofer with Butyl with rubber surround 1.5″ Voice Coil and 29oz vented magnet
- High Frequency Transducer: 2 – 3″ Pure Titanium Silk Dome Tweeter with 1″ Voice Coil and 12.7oz magnet
- Damping: 1″ Lamb’s Wool & Poly Fiber, Construction: 1/4″ Brushed Aluminum fascia, 3/4″ MDF back box, Gold Plated Terminals
- Overall Dimensions: 19″ W x 48″ H x 7″ D,
- Cutout Dimensions: 16 7/8″ W x 47 5/8″ H
- Grills: Not included. Custom made grills can be made at additional cost
- Weight: 74 lbs each, 82 lbs SW,
- Warranty: 3 Years
📞 Call Now: +91 9925027445 / +91 9054437875 | 🌐 Visit: rjmaudiocomponents.com | 📍 Location